Developed at its R&D facility and manufactured at its plant in Atlanta, GA this unique propriety traffic paint TTP-115 Type II is a high performance, high solids, extremely durable acrylic /alkyd co polymer solvent based paint. It dries quickly to a hard, extremely durable finish even in humid cold conditions. The viscosity is adjusted to a spray consistency and is ready to use, thinning is not required or recommended. Apply TTP-115 with a synthetic bristle brush, synthetic roller and low pressure airless spray striping equipment designed to handle solvent based paints. This formula can be applied to as much as a 30-mil wet thickness each pass in two passes. Glass beads can also be added for more reflectivity. It can be top coated with a USSC clear coat for extra longevity and performance. Cleanup of striping machine and uncured paint is done with paint thinner.
For use as a high performance traffic line paint on parking lots, parking garages, streets, roads, highways and airport runway marking paint. It has good hiding power, good overage, contains high solids and low VOC's. It contains some acetone to reduce the VOC'S. Being a solvent based paint it is flammable. It is good for most substrates, except new asphalt and freshly applied seal coating. Its exterior durability, glass bead retention, abrasion resistance and adhesion to substrate, is excellent.