Formulated and manufactured at our facility in Atlanta, TEP is a specially formulated two component epoxy primer that is designed to have a 10 hour pot life ( working time after the two components are mixed ) yet dries fast ( 10 minutes ) when applied on concrete, asphalt as a primer or as a protective coating. Once applied and it is tack free, thermoplastic traffic paint ( of any type - spray, extrude, hydrocarbon or alkyd ) or conventional traffic paint can be applied over it. This cross linking epoxy primer forms a good strong deep penetrating base coat to help the applied top-coat thermoplastic paint bond better to the substrate. It also forms a water barrier to protect and prolong the life of the solid thermoplastic traffic paint.

• Use as primer on side walks, pedestrian crossings, turn arrows and all high hard to bond high traffic surface areas.
• Clear, two component, crosslinking epoxy-amine chemistry for better bonding, toughness and water resistance.
• Convenient equal parts mixing ratio. 1 part A with 1 part B by volume.
• Long open time ( pot life ) 10 hours after the components have been thoroughly mixed.
• Fast Dry. Dry to touch : 5 mins. To Recoat : 15 mins. max. No thinning needed.
• Excellent adhesion to concrete, asphalt and most road, parking garage surfaces and to top coated traffic paint.
• Forms a good moisture barrier to protect and help the top coated thermoplastic traffic paint last longer.
• Clean-up before dry and before complete cure is finished, with lacquer thinner or toluene.
• Can be applied with brush, roller, or spray equipment designed for solvent based coatings.
• Coverage 300 sq. feet / gallon or 600 linear feet of 4 inch wide line per gallon.
• Caution : Solvent based, contains high VOC's 4.5 lbs / gallon. Caution : Flammable
• Shelf life 1 year in unopened, well sealed containers.
• Formulated and MADE IN THE USA.
• For more information, a recommendation or to ORDER call 1-800-278-7473 or 1-800-2-STRIPE.