Manufactured at our facility in Atlanta GA, ARY2K is a two component, crosslinking, low VOC, isocyanate free, extremely durable, enamel paint. Part A resin is packaged in 5 gallon containers. Part B catalyst is packaged in quart containers. No thinning is required, all components are ready to use. Part B has to added to the Part A before application. Thoroughly mix the two components, the resin and catalyst, in the right proportions as provided and as indicated on the bucket label instructions. No need for a jiffy mixer or induction time. Mixing ratio is 200 gms of catalyst to 1 gallon of the resin or 1 quart of catalyst per 5 gallon container. The mixed product can be applied using brush, roller, airless spray machines. Working time ( pot life ) is 4 hours under normal conditions. After application, spray machine has to be thoroughly rinsed out with paint thinner or the mixed product can damage the machine. Even though this product has a long working time ( pot life ), the time for foot traffic is fast ( maximum 2 hours ).

• Two component, cross linking, yet easy to mix, apply, clean up. Low temperature curing.
• Based on two component crosslinking cure technology for superb Durability, Good Adhesion, Flexibility, and good chemical resistant.
• High solids over 90%, contains NO isocyanate, tin or BPA. 
• Use as a tough, durable, chip, flake and scratch resistant concrete coating for high traffic areas.
• Excellent performance when applied on concrete, warehouse flooring, aircraft hangers, warehouse floors, clean rooms, garage floors, stadiums, etc.
• Can be used as a OEM coating during production or can be applied as a protective coating on site.
• Available in several colors and a clear formulation. Reduced labelling hazardous requirements. Lower carbon footprint.
• Formulated and MADE IN THE USA.
• For more information, a recommendation or to ORDER call 1-800-2-STRIPE or 1-800-278-7473.